I. Product introduction
      CL6882M01is to satisfy < /span>UPS, EPS< span>, an online battery inspection module designed for systems such as DC power supply and communication power supply. Complete the monitoring and alarm functions of battery pack voltage, battery current, single battery voltage, and battery ambient temperature.
       Applies to 2V, 6V , 12VThe battery is monitored online.
Second, Main Features
     1、Battery voltage measurement: Check the voltage of 24 batteries. And calculate the voltage value of all battery packs.
     2. Battery pack current measurement: Collect the signal of the current sensor to calculate the battery Pack current. Detect each battery       3. At the same time as the voltage, measure the current of the battery pack once and record it separately.
     4. Battery temperature detection: It can detect two temperature signals.
     5. Status indicator: Provide 3 indicators: power, communication, alarm .
     6. Communication function: modules with RS485 or CAN communication interface are available Select.
     7. DIP switch setting: Set the communication protocol and module through the DIP switch Address.
     8. Parameter setting storage: The module's alarm threshold and other parameters can be set through the host computer The data, setting parameters and calibration data will be saved in the external EEPROM and will not be lost when power off.
     9、Alarm: By setting parameters such as alarm threshold, alarm data can be sent when the battery voltage is abnormal, and the alarm indicator can be driven.